Prof. Nicholas Bishop

Department Medizintechnik
Professor für Biomechanik / Technische Mechanik

Ulmenliet 20
21033 Hamburg

Raum N5.18

T +49 40 428 75-6397
E-Mail

Tätigkeiten

Schwerpunktthemen/Kernkompetenzen

Implantat Mechanik

Ämter/Gremien/Mitgliedschaften

Prüfungsausschussvorsitzender Bachelor MT

KURZBIOGRAPHIE

Nicholas Bishop hat an der Universität Bath in seinem Heimatland Großbritannien Maschinenbau studiert und sich in Biomechanik spezialisiert. Danach hat er zehn Jahre als Forschungsingenieur an dem AO Forschungsinstitut in Davos, Schweiz gearbeitet. Seine Doktorarbeit entstand als Kooperationsprojekt des AO – Davos und des Biomechanik Instituts an der TU Hamburg-Harburg und behandelte die mechanische Stimulation von Frakturheilung. Seit 2002 hat er mit Prof. Michael Morlock an diesem Institut gearbeitet und in Zusammenarbeit mit verschiedenen Unternehmen, insbesondere DePuy-Synthes, viele Aspekte des Gelenkersatzes und der Implantatenwicklung erforscht. Präklinische Tests, Retrieval- und Fehleranalysen zählen zu dieser Arbeit und haben zur Beteiligung an verschiedenen Fortbildungsprogrammen für Chirurgen geführt. Seit März 2014 ist er an der HAW Hamburg als Professor für Biomechanik und Technische Mechanik beschäftigt

Publikationen

Bishop NE, Wright P, Preutenborbeck M. A parametric numerical analysis of femoral stem impaction. (2022) PLoS One. 17(5)

Bishop NE, Wright P, Dudrey-Harvey C, Preutenborbeck M. A model of uniaxial implant seating by impaction. (2021) Medical Engineering & Physics. 97:47-55.

Krull A, Morlock MM, Bishop NE. Maximizing the fixation strength of modular components by impaction without tissue damage. (2018) Bone Joint Res. 7:196-204

Krull A, Morlock MM, Bishop NE. The Influence of Contamination and Cleaning on the Strength of Modular Head Taper Fixation in Total Hip Arthroplasty. (2017) J Arthroplasty. 

Krull A, Bishop NE, Steffen NM, Lampe F, Püschel K, Morlock MM. Influence of the compliance of a patient's body on the head taper fixation strength of modular hip implants. (2017) Clin Biomech., 46:1-5.

Morlock M, Bünte D, Gührs J, Bishop N. Corrosion of the Head-Stem Taper Junction-Are We on the Verge of an Epidemic?: Review Article. (2017 ) HSS J., 13(1):42-49.

Nagel K, Bishop NE, Schlegel UJ, Püschel K, Morlock MM. The Influence of Cement Morphology Parameters on the Strength of the Cement-Bone Interface in Tibial Tray Fixation. (2017) J Arthroplasty, 32(2):563-569

Damm NB, Morlock MM, Bishop NE. Influence of trabecular bone quality and implantation direction on press-fit mechanics. (2017) J Orthop Res. ,35(2):224-233.

Damm, N.B., Morlock, M.M., Bishop, N.E. Friction coefficient and effective interference at the implant-bone interface (2015) Journal of Biomechanics, 48 (12), art. no. 7259, pp. 3517-3521.

Witt, F., Gührs, J., Morlock, M.M., Bishop, N.E. Quantification of the contact area at the head-stem taper interface of modular hip prostheses (2015) PLoS ONE, 10 (8), art. no. 0135517

Buente, D., Huber, G., Bishop, N., Morlock, M. Quantification of material loss from the neck piece taper junctions of a bimodular primary hip prosthesis. A retrieval study from 27 failed Rejuvenate bimodular hip arthroplasties (2015) Bone and Joint Journal, 97B (10), pp. 1350-1357.

Ivicsics, M.F., Bishop, N.E., Püschel, K., Morlock, M.M., Huber, G. Increase in facet joint loading after nucleotomy in the human lumbar spine (2014) Journal of Biomechanics, 47 (7), pp. 1712-1717.

Bishop, N.E., Höhn, J.-C., Rothstock, S., Damm, N.B., Morlock, M.M. The influence of bone damage on press-fit mechanics (2014) Journal of Biomechanics, 47 (6), pp. 1472-1478.

Schlegel, U.J., Bishop, N.E., Püschel, K., Morlock, M.M., Nagel, K. Comparison of different cement application techniques for tibial component fixation in TKA (2014) International Orthopaedics, 39 (1), pp. 47-54.

Morlock, M.M., Witt, F., Bishop, N., Behn, R., Dalla Pria, P., Barrow, R., Dymond, I. Wear of a composite ceramic head caused by liner fracture (2014) Orthopedics, 37 (7).

Witt, F., Bosker, B.H., Bishop, N.E., Ettema, H.B., Verheyen, C.C.P.M., Morlock, M.M. The relation between titanium taper corrosion and cobalt-chromium bearing wear in large-head metal-on-metal total hip prostheses: A Retrieval Study (2014) Journal of Bone and Joint Surgery - American Volume, 96 (18), p. e157.

Lu, Y., Krause, M., Bishop, N., Sellenschloh, K., Glüer, C.-C., Püschel, K., Amling, M., Morlock, M.M., Huber, G. The role of patient-mode high-resolution peripheral quantitative computed tomography indices in
the prediction of failure strength of the elderly women's thoracic vertebral body (2014) Osteoporosis International, 26 (1), pp. 237-244.

Morlock, M.M., Huber, G., Kaddick, C., Bishop, N. Preclinical testing-clinical application-risk assessment: Example using hip arthroplasty [Präklinische Testung - klinische Anwendung - Schadensanalyse: Beispiel Hüftendoprothetik] (2013) Trauma und Berufskrankheit, 15 (4), pp. 221-225.

Morlock, M.M., Huber, G., Bishop, N. Technology and handling of ceramic implants (2013) Total Hip Arthroplasty: Tribological Considerations and Clinical Consequences, pp. 3-16.

Morlock, M.M., Huber, G., Bishop, N. Large-diameter total hip replacement bearings (2013) Tribology in Total Hip and Knee Arthroplasty: Potential Drawbacks and Benefits of Commonly Used Materials, pp. 3-14.

Ivicsics, M.F., Bishop, N.E., Sellenschloh, K., Berteau, J.-P., Morlock, M.M., Huber, G.The effect of nucleotomy on facet joint loading - A porcine in vitro study (2013) Clinical Biomechanics, 28 (8), pp. 853-859.

Fan, N., Morlock, M.M., Bishop, N.E., Huber, G., Hoffmann, N., Ciavarella, M., Chen, G.X., Hothan, A., Witt, F. The influence of stem design on critical squeaking friction with ceramic bearings (2013) Journal of Orthopaedic Research, 31 (10), pp. 1627-1632.

Bishop, N., Witt, F., Pourzal, R., Fischer, A., Rütschi, M., Michel, M., Morlock, M. Wear patterns of taper connections in retrieved large diameter metal-on-metal bearings (2013) Journal of Orthopaedic Research, 31 (7), pp. 1116-1122.

Ivicsics, M.F., Bishop, N.E., Sellenschloh, K., Berteau, J.-P., Morlock, M.M., Huber, G. The effect of nucleotomy on facet joint loading in the porcine lumbar spine (2013) Computer Methods in Biomechanics and Biomedical Engineering, 16 (SUPPL 1), pp. 222-223.

Nüchtern, J.V., Sellenschloh, K., Bishop, N., Jauch, S., Briem, D., Hoffmann, M., Lehmann, W., Pueschel, K., Morlock, M.M., Rueger, J.M., Großterlinden, L.G. Biomechanical evaluation of 3 stabilization methods on acromioclavicular joint dislocations (2013) American Journal of Sports Medicine, 41 (6), pp. 1387-1394.

Bishop, N.E., Hothan, A., Morlock, M.M. High friction moments in large hard-on-hard hip replacement bearings in conditions of poor lubrication (2013) Journal of Orthopaedic Research, 31 (5), pp. 807-813.

Skrzypiec, D.M., Bishop, N.E., Klein, A., Püschel, K., Morlock, M.M., Huber, G. Estimation of shear load sharing in moderately degenerated human lumbar spine (2013) Journal of Biomechanics, 46 (4), pp. 651-657.

Gebert De Uhlenbrock, A., Püschel, V., Püschel, K., Morlock, M.M., Bishop, N.E. Influence of time in-situ and implant type on fixation strength of cemented tibial trays - A post mortem retrieval analysis (2012) Clinical Biomechanics, 27 (9), pp. 929-935.

Skrzypiec, D.M., Klein, A., Bishop, N.E., Stahmer, F., Püschel, K., Seidel, H., Morlock, M.M., Huber, G.Shear strength of the human lumbar spine (2012) Clinical Biomechanics, 27 (7), pp. 646-651.

Rehmer, A., Bishop, N.E., Morlock, M.M. Influence of assembly procedure and material combination on the strength of the taper connection at the head-neck junction of modular hip endoprostheses (2012) Clinical Biomechanics, 27 (1), pp. 77-83.

Morlock, M.M., Bishop, N., Kaddick, C. Which hip articulation bearing for which patient? Tribology of the future [Welche Hüftgelenkgleitpaarung für welchen Patienten? Tribologie der Zukunft] (2011) Orthopade, 40 (12), pp. 1061-1067.

Schlegel, U.J., Bishop, N., Sobottke, R., Perka, C., Eysel, P., Morlock, M.M. Squeaking as a cause for revision of a composite ceramic cup [Quietschen als Revisionsursache einer Kompositkeramikpfanne] (2011) Orthopade, 40 (9), pp. 812-816.

Rothstock, S., Uhlenbrock, A., Bishop, N., Laird, L., Nassutt, R., Morlock, M. Influence of interface condition and implant design on bone remodelling and failure risk for the resurfaced femoral head (2011) Journal of Biomechanics, 44 (9), pp. 1646-1653.

Bishop, N.E., Burton, A., Maheson, M., Morlock, M.M. Biomechanics of short hip endoprostheses - The risk of bone failure increases with decreasing implant size (2010) Clinical Biomechanics, 25 (7), pp. 666-674.

Rothstock, S., Uhlenbrock, A., Bishop, N., Morlock, M. Primary stability of uncemented femoral resurfacing implants for varying interface parameters and material formulations during walking and stair climbing (2010) Journal of Biomechanics, 43 (3), pp. 521-526.

Bishop, N.E., Schönwald, M.A., Schultz, P., Püschel, K., Morlock, M.M. The condition of the cement mantle in femoral hip prosthesis implantations - A post mortem retrieval study (2009) HIP International, 19 (2), pp. 87-95.

Gebert, A., Peters, J., Bishop, N.E., Westphal, F., Morlock, M.M. Influence of press-fit parameters on the primary stability of uncemented femoral resurfacing implants (2009) Medical Engineering and Physics, 31 (1), pp. 160-164.

Bishop, N.E., Waldow, F., Morlock, M.M. Friction moments of large metal-on-metal hip joint bearings and other modern designs (2008) Medical Engineering and Physics, 30 (8), pp. 1057-1064.

Morlock, M.M., Bishop, N., Zustin, J., Hahn, M., Rüther, W., Amling, M. Modes of implant failure after hip resurfacing: morphological and wear analysis of 267 retrieval specimens. (2008) The Journal of bone and joint surgery. American volume, 90 Suppl 3, pp. 89-95.

Bishop, N.E., Morlock, M.M. Tissue Sparing Hip implants (2008) European Cells and Materials, 16 (SUPPL.2), p. 4.

Morlock, M.M., Bishop, N., Stahmer, F., Zustin, J., Breer, S., Sauter, G., Hahn, M., Krause, M., Rüther, W., Amling, M. Reasons for failure of hip resurfacing implants. A failure analysis based on 250 revision
specimens [Versagensgründe von oberflächenersatzimplantaten der Hüfte. Eine analyse von 250 revisionspräpparaten] (2008) Orthopade, 37 (7), pp. 695-703.

Grant, J.A., Bishop, N.E., Götzen, N., Sprecher, C., Honl, M., Morlock, M.M. Artificial composite bone as a model of human trabecular bone: The implant-bone interface (2007) Journal of Biomechanics, 40 (5), pp. 1158-1164.

Westphal, F.M., Bishop, N., Honl, M., Hille, E., Püschel, K., Morlock, M.M. Migration and cyclic motion of a new short-stemmed hip prosthesis - a biomechanical in vitro study (2006) Clinical Biomechanics, 21 (8), pp. 834-840.

Morlock, M.M., Bishop, N., Rüther, W., Delling, G., Hahn, M. Biomechanical, morphological, and histological analysis of early failures in hip resurfacing arthrosplasty (2006) Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 220 (2), pp. 333-344.

Bishop, N.E., Van Rhijn, M., Tami, I., Corveleijn, R., Schneider, E., Ito, K. Shear does not necessarily inhibit bone healing (2006) Clinical Orthopaedics and Related Research, (443), pp. 307-314.

Westphal, F.M., Bishop, N., Püschel, K., Morlock, M.M. Biomechanics of a new short-stemmed uncemented hip prosthesis: An in-vitro study in human bone (2006) HIP International, 16 (SUPPL. 3)

Zeiter, S., Bishop, N., Ito, K. Significance of the mechanical environment during regeneration of the intervertebral disc (2005) European Spine Journal, 14 (9), pp. 874-879.

Schwieger, K., Carrero, V., Rentzsch, R., Becker, A., Bishop, N., Hille, E., Louis, H., Morlock, M., Honl, M. Abrasive water jet cutting as a new procedure for cutting cancellous bone - In vitro testing in comparison with the oscillating saw (2004) Journal of Biomedical Materials Research - Part B Applied Biomaterials, 71 (2), pp. 223-228.

Honl, M., Rentzsch, R., Schwieger, K., Carrero, V., Dierk, O., Dries, S., Louis, H., Pude, F., Bishop, N., Hille, E., Morlock, M. The water jet as a new tool for endoprosthesis revision surgery - An in vitro study on human bone and bone cement (2003) Bio-Medical Materials and Engineering, 13 (4), pp. 317-325.

Bishop, N.E., Schneider, E., Ito, K. An experimental two degrees-of-freedom actuated external fixator for in vivo investigation of fracture healing (2003) Medical Engineering and Physics, 25 (4), pp. 335-340.

Bishop, N.E., Ferguson, S., Tepic, S. Porosity reduction in bone cement at the cement-stem interface (1996) Journal of Bone and Joint Surgery - Series B, 78 (3), pp. 349-356.

Bishop, N., Tepic, S., Bresina, S.J. A distractor for fracture reduction with minimal subsidiary handling forces (1995) Injury, 26 (SUPPL. 2).

x